Type Bar And Segment Assembler: A description for the type bar and segment assembler job

Benchwork Jobs » Jobs In Fabrication Assembly And Repair Of Metal Products Nec » Metal Unit Assemblers And Adjusters Nec » Type Bar And Segment Assembler

Type Bar And Segment Assembler – Assembles typewriter type-bar-and-segment units and bends ends of type bars to specified angles and clearances preparatory to type soldering, using handtools and hand-powered brake: Clamps segment to holding device and inserts type bars into segment slots. Pushes curved wire (fulcrum) through channel in segment and through holes in type bars to hold them in place. Moves bars to determine snugness of fit. Bends type-bars to fit precisely into segment slots, using special pliers. Grinds defective bars to fit, using emery wheel. Positions type-bar-and-segment assembly to holding plate on braking device. Moves levers to adjust quadrant (scale in degrees) to degree desired, to bend ends of type bars to specified angles and clearances, and to release bent type bars from holding and bending jaws. Removes formed type-bar-and-segment unit from braking device. Positions type-bar-and-segment assembly in guide-installation fixture and installs type guide, using special alignment tools and power screwdriver. Checks outside bars for guide clearance after removal from fixture, using gauge. May also be designated according to work performed as Fitter, Type-Bar-And-Segment (it industry), Former, Type-Bar-And-Segment (it industry), Guide-Installer, Type-Bar-And-Segment (it industry), Spacer, Type-Bar-And-Segment (it industry).

Job industry: it industry

Other job descriptions:
Type Bar And Segment Assembler
Atomizer Assembler
Bar And Filler Assembler
Bearing Ring Assembler
Bench Assembler
Bench Hand 2
Drawer Upfitter
Fitter 2
Hydraulic Chair Assembler
Injector Assembler
Lock Assembler
Lock Assembler 1
Lock Installer
Metal Bed Assembler
Plumbing Hardware Assembler
Spring Assembler
Subassembler 1
Valve Grinder
Vending Machine Assembler
Wheel Lacer And Truer
Wrapper Operator
Type Soldering Machine Tender
Wheel Truing Machine Tender
Production Assembler
Fan Blade Aligner
Aligning Inspector
Type Inspector
Push Connector Assembler
Roller Bearing Inspector
Metal Furniture Assembly Supervisor
Inspection Supervisor 4
Locksmith
Locksmith Apprentice
Magnetic Particle And Penetrant Inspector
Towel Cabinet Repairer
Metal Can Inspector
Atomic Fuel Assembler
Model Builder
Model Maker 1A
Model Maker Apprentice
Mold Stamper And Repairer
Metal Organ Pipe Maker
Patternmaker 3
Reed Maker
Hand Spring Former
Wire Mesh Filter Fabricator
Sewing Machine Tester
Fire Extinguisher Repairer
Silk Screen Frame Assembler
Hand Straightener
Inspector 14 I
Spoilage Worker
Fabric Stretcher
Autoclave Operator 1A
Adjuster
Metal Furniture Assembler
Assembly Line Inspector
Babbitter
Bird Cage Assembler
Cage Maker
Cigarette Lighter Repairer
Clip Bolter And Wrapper
Hand Stamper
Hot Top Liner
Key Cutter
Mold Stamper
Hand Reamer
Repairer 3
Hand Riveter
Salvager
Wire Screen And Fabric Shearer And Trimmer
Spring Fitter
Stab Setter And Driller
Torch Straightener And Heater
Hand 1 Tube Bender
Utility Operator 2
Wire Frame Lamp Shade Maker
Wire Rope Sling Maker
Gold Reclaimer
Hot Box Operator
Gold Leaf Roller
Tin Can Laborer
Cleaner And Polisher
Furniture Cleaner 1
Hot Top Liner Helper
Inspector 15 I

Comments are closed.