Radial Arm Saw Operator: A description for the radial arm saw operator job

Machine Trades Jobs » Wood Machining Jobs » Sawing Jobs 1 » Radial Arm Saw Operator

Radial Arm Saw Operator – Operates circular saw mounted on overhead radial arm to cut boards and other woodstock to specifications: Reads work order or receives instructions from supervisor. Turns crank to raise and lower saw to depth of cut. Turns hand nuts and rotates radial arm and saw arbor to set saw for angle and bevel cuts. Lays material on table and aligns cutting mark under saw blade. Starts saw and pushes or pulls rotating blade against workpiece to make cut. Sets and locks blade at right angles to radial arm and feeds material into saw to rip lumber. May also replace saw blade with attachments to shape, rout, groove, mortise, or drill workpiece.

Job industry: wood working

Other job descriptions:
Radial Arm Saw Operator
Resaw Operator
Rip And Groove Machine Operator
Ripsaw Operator
Shake Sawyer
Stave Bolt Equalizer
Stave Log Cut Off Saw Operator
Stock Patch Sawyer
Variety Saw Operator
Automatic Log Cut Off Sawyer
Trimmer Sawyer
Band Saw Operator 2
Band Saw Operator 3
Beading Sawyer
Bolter 1
Buzzsaw Operator
Cob Sawyer
Log Cut Off Sawyer
Dowel Pointer
Kerfer Machine Operator
Cork Slabs Sawyer
Shingle Trimmer
Slasher Operator
Stave Log Ripsaw Operator
Stave Saw Operator
Turning Machine Operator
Automatic Bandsaw Tender
Cut Off Saw Operator 2
Clothespin Machine Operator
Trimmer Helper
Turning Machine Operator Helper
Buzzsaw Operator Helper
Log Inspector
Sawmill Worker
Assembly Room Supervisor
Cutting Department Supervisor
Framing Mill Supervisor
Machining Supervisor
Sawmill Supervisor
Shuttle Fitting Supervisor
Shuttle Preparation Supervisor
Shuttle Veneering Supervisor
Sawing And Assembly Supervisor
Wood Crew Supervisor 1
Machine Setter 3
Checkering Machine Adjuster
Assembly Inspector
Wood Machinist Apprentice
Wood Machinist
Pipe And Tank Fabricator
Dado Operator
Rafter Cutting Machine Operator
Tenoner Operator
Multi Purpose Machine Operator
Turning Machine Set Up Operator
Power Barker Operator
Box Blank Machine Operator
Frame Table Operator
Tongue And Groove Machine Operator
Adzing And Boring Machine Operator
Barrel Assembler
Bucket Turner
Chucking And Boring Machine Operator
Chucking And Sawing Machine Operator
Corner Brace Block Machine Operator
Croze Machine Operator
Double End Trimmer And Boring Machine Operator
Dowel Inserting Machine Operator
Embossing Machine Operator 4
Inletter
Last Trimmer
Nailing Machine Operator
Plugging Machine Operator
Tip Inserter
Utility Operator
Barrel Assembler Helper
Basket Assembler 1
Blind Slat Stapling Machine Operator
Bottom Hoop Driver
Circle Cutting Saw Operator
Clamper
Coat Hanger Shaper Machine Operator
Core Composer Feeder
Corrugated Fastener Driver
Dovetail Machine Operator
Doweling Machine Operator

Leave a Reply