Hairspring Vibrator: A description for the hairspring vibrator job

Benchwork Jobs » Jobs In Fabrication And Repair Of Scientific Medical Photographic Optical Horological And Related Products » Jobs In Fabrication And Repair Of Watches Clocks And Parts » Hairspring Vibrator

Hairspring Vibrator – Locates vibrating point (point at which length of spring is for example to cause attached balance wheel to oscillate at specified rate) on clock and watch hairsprings and cuts hairspring at specified point to synchronize oscillation of movements, utilizing one or both of following methods: (a) Fastens free end of spring of hairspring assembly in fixture of electronic vibrating device, and adjusts bed of device until it touches pivot of vertically oscillating balance wheel, as indicated on cathode-ray tube. Observes second cathode-ray tube to determine excess length of spring as vertical swings are translated into corresponding horizontal oscillations. Winds excess length of spring into holding fixture of device and readjusts bed until cathode-ray tube readings are within acceptable limits. Starts shears to cut excess spring at specified distance from vibrating point for attachment to stud. (b) Inserts end of spring into holding tweezers of master balance wheel assembly, and adjusts tweezers until pivots and arms of test and master balances are aligned. Releases lever that gives starting impulse to both balances simultaneously, and observes operation to determine if balances are synchronized. Resets holding point of vibrator tweezers and repeats operation until balances are synchronized. Cuts off spring at specified distance from vibrating point for attachment to stud, using cutting pliers.

Job industry: watches industry

Other job descriptions:
Hairspring Vibrator
Hairspring 2Nspector
Watch Assembly Inspector
Watch Train Inspector
Location And Measurement Technician
Pallet Stone Inserter
Pallet Stone Positioner
Screwhead Polisher
Watch Assembler
Balance Assembler
Mechanism Inspector
Poising Inspector
Watch Parts Inspector
Dial Refinisher
Auto Clocks Repairer
Hand Stoner
Set Up Worker
Timing Adjuster
Barrel Finisher
Countersinker
Polisher 3
Balance Wheel Screw Hole Tapper
Tooth Polisher
Alarm Mechanism Adjuster
Movement Assembler
Balance Truer
Balance Bridge Assembler
Bench Hand 3
Beveler 2
Blocker 3
Balance Wheel Arm Burnisher
Burrer
Cannon Pinion Adjuster
Cap Jewel Plate Assembler
Caser
Clock Assembler
Collet Driller
Colleter
Crown Attacher
Crown Wheel Assembler
Crystal Cutter
Dial Screw Assembler
Dialer
Disassembler
Movement Assembly Final Inspector
Finer
Hairspring Adjuster
Balance Wheel Hand Filer
Hands Assembler
Barrel Assembly Inspector
Hairspring Truing Inspector
Hairspring I2Nspector
Wheel And Pinion Inspector
Jewel Inserter
Jewel Staker
Lacquerer 1
Mechanism Assembler
Oiler 1
Overcoiler
Pallet Assembler
Pallet Rectifier
Pearler
Regulator Pin Inserter
Dial Polisher
Put In Beat Adjuster
Set Staff Fitter
Staker
Hairspring Studder
Transferrer
Pinion And Wheel Truer
Collet Gluer
V Groove Cutter
Machine Deburrer
Driller And Broacher
End Polisher
Grinder 1A
Timing Inspector
Mainspring Winder And Oiler
Pinion Polisher
Balance Screwhead Polisher
Pierce And Shave Press Operator
Hand Profiler
Solderer 1
Tapper 2
Torque Tester
Tubing Machine Tender

Leave a Reply