Hairspring Adjuster: A description for the hairspring adjuster job

Benchwork Jobs » Jobs In Fabrication And Repair Of Scientific Medical Photographic Optical Horological And Related Products » Jobs In Fabrication And Repair Of Watches Clocks And Parts » Hairspring Adjuster

Hairspring Adjuster – Inspects and adjusts watch hairsprings after assembly to pillar plate for conformance to mechanical specifications, using loupe, holding device, and tweezers: Mounts assembly in holding device. Examines outer coil to verify that coil is centered between regulator pins, and that positioning of overcoil is within acceptable limits, using loupe. Pinches segment of coil to position and level coil, using tweezers. Spins balance wheel to verify that all coils of spring are within same plane and concentric with collet when oscillating. Adjusts coils to correct discrepancies, using tweezers.

Job industry: watches industry

Other job descriptions:
Hairspring Adjuster
Balance Wheel Hand Filer
Hands Assembler
Barrel Assembly Inspector
Hairspring Truing Inspector
Hairspring I2Nspector
Wheel And Pinion Inspector
Jewel Inserter
Jewel Staker
Lacquerer 1
Mechanism Assembler
Oiler 1
Overcoiler
Pallet Assembler
Pallet Rectifier
Pearler
Regulator Pin Inserter
Dial Polisher
Put In Beat Adjuster
Set Staff Fitter
Staker
Hairspring Studder
Transferrer
Pinion And Wheel Truer
Collet Gluer
V Groove Cutter
Machine Deburrer
Driller And Broacher
End Polisher
Grinder 1A
Timing Inspector
Mainspring Winder And Oiler
Pinion Polisher
Balance Screwhead Polisher
Pierce And Shave Press Operator
Hand Profiler
Solderer 1
Tapper 2
Torque Tester
Tubing Machine Tender
Destaticizer Feeder
Machine Feeder 1
Band Attacher
Barrel Cap Setter
Crystal Attacher
Dial Brusher
Clock And Watch Hands Dipper
Foot Straightener
Gauger 2
Hairspring Cutter 1
Hairspring Cutter 2
Hammer Adjuster
Balance Truing Inspector
Balance Wheel Motion Inspector
Balance Bridge Inspector
Casing Inspector
Dials Inspector
Soldering Inspector
Timers Inspector
Arbor End Mainspring Former
Brace End Mainspring Former
Masker
Motor Polarizer
Clock And Watch Hands Mounter
Clock And Watch Hands Painter
Parts Remover
Racker 3
Center Hole Reamer
Rotor Assembler
Set Key Driver
Spring Layer
Washer 4
Winder 1
Supervisor 38 I
Optician Apprentice
Optician
Optician 1
Machine Sizer
Precision Inspector
Lay Out Technician
Contact Lens Lathe Operator
Optical Element Coater
Precision Lens Grinder
Precision Lens Grinder Apprentice
Precision Lens Centerer And Edger
Contact Lens Blocker And Cutter

Leave a Reply