Contact Lens Blocker And Cutter: A description for the contact lens blocker and cutter job

Benchwork Jobs » Jobs In Fabrication And Repair Of Scientific Medical Photographic Optical Horological And Related Products » Jobs In Fabrication And Repair Of Engineering And Scientific Instruments And Equipment Nec » Contact Lens Blocker And Cutter

Contact Lens Blocker And Cutter – Blocks contact lens blanks and cuts lenses to specified diameter, using jeweler’s lathe and handtools: Immerses laps I in molten wax and embeds lens in wax or presses two-faced adhesive tape into depression of lap, using rounded tool, and affixes lens to tape. Trims excess tape, using knife. Positions lens and lap assembly in blocking device. Presses plunger to center and fasten lens to blocking device. Mounts blocked lens in chuck of jeweler’s lathe. Turns crank and observes gauge to set cutting tool for specified diameter. Starts lathe and turns handle to feed cutting tool into lens. Removes cut lens from lathe and smooths burrs, using emery cloth. Places laps in container of solvent to remove tape or wax residue before reuse.

Job industry: optical industry

Other job descriptions:
Contact Lens Blocker And Cutter
Hand Glass Cutter
Hand Lens Polisher
Optical Glass Etcher
Eyeglass Lens Cutter
Precision Lens Generator
Precision Lens Polisher
Hand Blocker
Blocking Machine Tender
Driller 1
Hand Grinder
Lens Fabricating Machine Tender
Deblocker
Glass Checker
Multifocal Lens Inspector
Lens Examiner
Lens Blank Gauger
Lens Block Gauger
Optical Glass Wet Inspector
Radiological Equipment Specialist
Hearing Aid Repairer
Block Maker
Radio Repairer
Tape Recorder Repairer
Television And Radio Repairer
Assembly Adjuster
Phonograph Cartridge Assembler
Record Changer Assembler
Record Changer Tester
Electric Motor Repairing Supervisor
Inspection And Testing Supervisor
Electric Motor Analyst
Final Tester
Automotive Generator And Starter Repairer
Electric Motor Assembler And Tester
Electric Motor Repairer
Magneto Repairer
Propulsion Motor And Generator Repairer
Motors And Controls Tester
Motors And Generators Inspector
Electric Motor Fitter
Electric Motor Control Assembler
Hydraulic Governor Assembler
Electric Motor Winder
Field Ring Assembler
Insulation Cutter And Former
Skein Winder 1
Repair Armature Winder Helper
Carbon Brushes Assembler
Coil Connector
Electric Motor Assembler
Spider Assembler
Cleaner And Preparer
Instrument Shop Supervisor
Instrument Repairer 1
Assembler 6
Instrument Inspector 1
Switchbox Assembler 1
Small Appliance Assembly Supervisor
Fabrication Department Supervisor
Fluorescent Lighting Model Maker
Electrical Appliance Repairer
Vacuum Cleaner Repairer
Appliance Repairer
Assembler 7 I
Assembler 8 I
Assembler I2
Flasher Adjuster
Heating Element Winder
Patcher 1
Lamps Tester And Inspector
Waste Disposal Leakage Tester
Wiper
Electronic Coils Supervisor
Coil Winding Supervisor
Transformer Shop Supervisor
Transformer Tester
Coil Winding Machines Set Up Mechanic
Wire Coiler
Winding Inspector And Tester
Electrical Contacts Adjuster
Repair Coil Winder
Transformer Repairer
Armature Tester 1
Static Balancer
Armature Bander

Comments are closed.