Cannon Pinion Adjuster: A description for the cannon pinion adjuster job

Benchwork Jobs » Jobs In Fabrication And Repair Of Scientific Medical Photographic Optical Horological And Related Products » Jobs In Fabrication And Repair Of Watches Clocks And Parts » Cannon Pinion Adjuster

Cannon Pinion Adjuster – Attaches and adjusts cannon pinion to arbor of center wheel, using hand punch: Lubricates arbor, using oil-filled hypodermic needle. Positions cannon pinion over center wheel arbor and secures pinion onto arbor, using tweezers or hand punch. Pinches arbor with pliers at specified points to loosen or tighten pinion. Observes minute parts, using tweezers and loupe.

Job industry: watches industry

Other job descriptions:
Cannon Pinion Adjuster
Cap Jewel Plate Assembler
Caser
Clock Assembler
Collet Driller
Colleter
Crown Attacher
Crown Wheel Assembler
Crystal Cutter
Dial Screw Assembler
Dialer
Disassembler
Movement Assembly Final Inspector
Finer
Hairspring Adjuster
Balance Wheel Hand Filer
Hands Assembler
Barrel Assembly Inspector
Hairspring Truing Inspector
Hairspring I2Nspector
Wheel And Pinion Inspector
Jewel Inserter
Jewel Staker
Lacquerer 1
Mechanism Assembler
Oiler 1
Overcoiler
Pallet Assembler
Pallet Rectifier
Pearler
Regulator Pin Inserter
Dial Polisher
Put In Beat Adjuster
Set Staff Fitter
Staker
Hairspring Studder
Transferrer
Pinion And Wheel Truer
Collet Gluer
V Groove Cutter
Machine Deburrer
Driller And Broacher
End Polisher
Grinder 1A
Timing Inspector
Mainspring Winder And Oiler
Pinion Polisher
Balance Screwhead Polisher
Pierce And Shave Press Operator
Hand Profiler
Solderer 1
Tapper 2
Torque Tester
Tubing Machine Tender
Destaticizer Feeder
Machine Feeder 1
Band Attacher
Barrel Cap Setter
Crystal Attacher
Dial Brusher
Clock And Watch Hands Dipper
Foot Straightener
Gauger 2
Hairspring Cutter 1
Hairspring Cutter 2
Hammer Adjuster
Balance Truing Inspector
Balance Wheel Motion Inspector
Balance Bridge Inspector
Casing Inspector
Dials Inspector
Soldering Inspector
Timers Inspector
Arbor End Mainspring Former
Brace End Mainspring Former
Masker
Motor Polarizer
Clock And Watch Hands Mounter
Clock And Watch Hands Painter
Parts Remover
Racker 3
Center Hole Reamer
Rotor Assembler
Set Key Driver
Spring Layer
Washer 4

Comments are closed.