Blocker 3: A description for the blocker 3 job

Benchwork Jobs » Jobs In Fabrication And Repair Of Scientific Medical Photographic Optical Horological And Related Products » Jobs In Fabrication And Repair Of Watches Clocks And Parts » Blocker 3Blocker 3

Blocker 3 – Blocker, polishing Positions flat pieces, for example clutch levers and escape wheels, on circular metal blocks or into recesses in blocks preparatory to grinding operation: Heats block and applies shellac. Places pieces over surface of block, using tweezers. Reheats block, places sheet of paper on top of block, fits press block directly over circular block, and applies pressure in screw press to position pieces firmly in shellac. Removes pieces from press, and inspects parts for proper position prior to grinding process. Blocks parts, for example wheels and screws, using suction device. Heats, shellacs, and presses loaded blocks to secure parts. May also spread layer of vaseline over block to hold parts.

Job industry: watches industry

Other job descriptions:
Blocker 3
Balance Wheel Arm Burnisher
Burrer
Cannon Pinion Adjuster
Cap Jewel Plate Assembler
Caser
Clock Assembler
Collet Driller
Colleter
Crown Attacher
Crown Wheel Assembler
Crystal Cutter
Dial Screw Assembler
Dialer
Disassembler
Movement Assembly Final Inspector
Finer
Hairspring Adjuster
Balance Wheel Hand Filer
Hands Assembler
Barrel Assembly Inspector
Hairspring Truing Inspector
Hairspring I2Nspector
Wheel And Pinion Inspector
Jewel Inserter
Jewel Staker
Lacquerer 1
Mechanism Assembler
Oiler 1
Overcoiler
Pallet Assembler
Pallet Rectifier
Pearler
Regulator Pin Inserter
Dial Polisher
Put In Beat Adjuster
Set Staff Fitter
Staker
Hairspring Studder
Transferrer
Pinion And Wheel Truer
Collet Gluer
V Groove Cutter
Machine Deburrer
Driller And Broacher
End Polisher
Grinder 1A
Timing Inspector
Mainspring Winder And Oiler
Pinion Polisher
Balance Screwhead Polisher
Pierce And Shave Press Operator
Hand Profiler
Solderer 1
Tapper 2
Torque Tester
Tubing Machine Tender
Destaticizer Feeder
Machine Feeder 1
Band Attacher
Barrel Cap Setter
Crystal Attacher
Dial Brusher
Clock And Watch Hands Dipper
Foot Straightener
Gauger 2
Hairspring Cutter 1
Hairspring Cutter 2
Hammer Adjuster
Balance Truing Inspector
Balance Wheel Motion Inspector
Balance Bridge Inspector
Casing Inspector
Dials Inspector
Soldering Inspector
Timers Inspector
Arbor End Mainspring Former
Brace End Mainspring Former
Masker
Motor Polarizer
Clock And Watch Hands Mounter
Clock And Watch Hands Painter
Parts Remover
Racker 3
Center Hole Reamer
Rotor Assembler

Leave a Reply